Recent Topics
8K Seven Generator API
Is there any API documentation for the 8K Seven Generator?
API documentation
Hi, Is there an API document? I'm useing the six-g-gen2 device and would like to: a. command acces the MU-GEN-SIX-G/A-8 v1.14 exe application b. control the unit via the RS232 port I would like to execute all commands via Python scripts and so any examples
MURIDEO 6G6A-8K V1.14 application not showing changes in bit
Below is a screenshot of your software application for the 6 series generator and Analyzer, on top of the HDMI settings config for our APx555 audio analyzer. When I generate any HDMI signal and observe the Murideo application, the initial detection of
Murideo Six-G/Calman Profiling
I'm not sure if this is just me or it happens to everyone, but after I run through the profiling workflow and get to the results analysis page, the Six-G gets dropped as the pattern source and then I have to go back into the tab and reselect it. Once
New calibration related features for 2020 Alpha 9 Gen3 OLED TVs
Some news out of CES 2020 that pertains to the new 2020 Alpha 9 Gen3 LG OLED TVs and calibration. 1) There is a new HDR internal test pattern generator. With these patterns you can now fully validate an HDR10 and/or HLG calibration after CalMAN AutoCal.
CMS guide for Samsung TVs
Color accuracy is one of the main reasons why we calibrate displays. When it comes to calibrating the color gamut we traditionally had 2 controls; color and tint. Years ago display manufacturers started to offer CMS, or a Color Management System. This
HDR conversation with BBC engineers
The SMPTE site is full of great info in the form of webcasts. I recently watched this episode which featured 2 BBC engineers discussing HDR. Hearing a broadcast engineer's perspective on HDR and what it means to consumer displays is very interesting
Murideo SIX-G Firmware (Legacy Article)
The current firmware revisions as of today (10/10/2019) are ~ 1.89 (Fresco SIX-G, Gen 1) Firmware Number found in the upper right corner of the LCD Screen ~ 2.64 (Fresco SIX-G, GEN1 Revision 2) Firmware Number found in the upper right corner of the LCD
Calibrating Dolby Vision on Sony displays
There have always been questions on how to calibrate Dolby Vision on Sony TVs. Unfortunately we are still not able to do it due to the way Dolby Vision works specifically with Sony. Sony uses a specific Dolby Vision profile, referred to "Profile 5", or
Vizio PQ65F1 calibration notes
I had a chance to work on the Vizio PQ65F1 over the weekend. A very nice TV for the money and a great choice if the room is bright. The TV was able to hit 2400 nits calibrated in HDR and 687 nits calibrated in SDR. Here are a few notes. I will update
Q&A from "Audio 101 with Anthony Grimani"
In April of 2020 we hosted a webinar with audio guru Anthony Grimani. If you happened to miss the session live you can find the replay here: https://www.youtube.com/watch?v=G90ekzfA92Y We had some great questions during the session. Here they are with
Q&A from "Room Layouts and Speaker Configurations with Anthony Grimani pt 1"
In April of 2020 we hosted a webinar with audio guru Anthony Grimani discussing room layouts and speaker placement. This is a 2 part series (these were the questions from pt 1). If you happened to miss the pt 1 session live you can find the replay here:
Game of Thrones Is Not "Too Dark"
TV shows these days are shot to look more like film. We see plenty of shows that are intentionally gritty (any Marvel show), tinted a non-neutral color (Breaking Bad), and are overall much darker than traditional TV shows. This is done intentionally by